Welding-Dace da Azurfa-Copper Anti-Tarnish Shafi

a)        Juriya na Musamman na lalata

Bayan jiyya, abubuwan jan karfe suna nuna tsayin daka na ban mamaki, suna jure wa gwajin gishiri tsaka tsaki na sa'o'i 72 ba tare da canza launi ba. Abubuwan Azurfa suna kiyaye mutunci, suna nuna rashin lalacewa lokacin da aka fallasa su zuwa 3% potassium sulfide bayani na mintuna 5. Yana alfahari da ingantaccen kayan anti-sulfidation da anti-oxidation idan aka kwatanta da ma'auni na masana'antu, wannan ma'auni an ƙera shi don yanayin lalata.

b)        Ƙaddamar da Muhalli & Ƙirƙirar Ma'aikata-Lafiya

Yin amfani da tsarin tushen ruwa, wannan ba mai guba ba, dabarar da ba ta da haushi tana bin ƙa'idodin muhalli masu tsauri. Ba buƙatar wani keɓaɓɓen kayan kariya na sirri ba, yana da manufa don ƙaƙƙarfan aikace-aikacen aminci kamar masana'anta kayan adon da samar da mahaɗin lantarki.

c)       Welding-Dace Nanocoating

Yana nuna ma'auni mai kariya na nanometer, wannan bayani yana tabbatar da tsangwama ga aikin walda da lantarki na azurfa da saman jan karfe. Ya dace da ƙaƙƙarfan buƙatun haɗin haɗin kayan aikin lantarki, yana riƙe mafi kyawun juriyar lamba.

d)       Ingantaccen Ingantacciyar Aiki

Sassauci na aiki yana ba da damar amfani a cikin kewayon ƙananan zafin jiki na 45-55°C. Tsarin nutsewa mai sauƙi na mintuna 3-10 yana samar da fim ɗin nanoscale uniform, kuma tsaftacewar bayan jiyya ba ta barin streaks, yana mai da shi dacewa sosai don haɗawa cikin ayyukan masana'anta ta atomatik.

e)       Kariya mai ƙarfi na ɗan gajeren lokaci

Abubuwan haɗin jan ƙarfe mai tsafta suna ba da juriyar zafi. Suna riƙe da mutunci a 260 ° C na minti 20 kuma suna jure wa 300 ° C na minti 5 ba tare da canza launin ba. Yayin da tsayin daka na zafin zafi yana cikin R&D, ya riga ya cika buƙatun zafi na ɗan gajeren lokaci na yawancin aikace-aikacen masana'antu.

a) Samar da Kayan Lantarki

An inganta don abubuwan da suka dogara da tagulla a cikin taruka na PCB, masu haɗa wutar lantarki, da tashoshi. Yana rage lalata feshin gishiri da iskar ruwa mai zafi, yana tabbatar da daidaiton aikin lantarki da aminci.

b)        Kayayyakin kayan ado

Ƙirƙirar ƙira don kiyaye kayan adon azurfa da tagulla daga ɓarna mai haifar da sulfur. Yana ba da kariya daga gurɓataccen muhalli da gumi, yana kiyaye mutuncin kyawawan abubuwa na ƙarfe masu daraja.

c) Injiniyan Masana'antu

Mafi dacewa don masu musayar zafi na jan karfe, jujjuyawar motsi, da madaidaicin abubuwan kayan aiki. Yana kiyaye amincin kayan abu a cikin mahalli masu lalacewa, yana rage raguwar lokaci da farashin kula da rayuwa.

d) Hardware Architectural

Yana haɓaka ɗorewa na kayan ado na kayan ado na azurfa-Copper da kayan aikin gidan wanka. Rufin karewa yana inganta juriya na yanayi, yana tabbatar da adana dogon lokaci na ingancin ƙarewa.

1.       Shirye-shiryen Magani :

• Tsaftace tankin plating sosai, ƙara 75% na ƙarar ruwa mai tsafta, kuma zafi shi zuwa zafin aiki (55 ℃ ana ba da shawarar).

• A hankali ƙara mai kariyar 289-10 (a maida hankali na 100ml/L), motsawa daidai, sannan ƙara ruwa mai tsabta zuwa daidaitaccen ƙarar, kuma sake zafi zuwa zafin aiki.

2.       Tsarin Jiyya na Aiki :

• Pretreatment na workpieces: jiƙa don ragewa da tsaftacewa, sa'an nan kurkura da ruwa mai tsabta sau 3.

• Jiyya na kunnawa (na zaɓi): Yi nutsewa cikin maganin nitric acid na 0.5-1% na minti 0.5-1 (wanda ya dace da kayan aikin azurfa).

• Samuwar fim ɗin kariya: Jiƙa a cikin maganin aiki a 55 ℃ na minti 5, fitar da kurkura tare da ruwan zafi mai zafi 35-40 ℃.

• Maganin bushewa: Juya busasshiyar (bayar da ganga) ko bushe a cikin tanda (rack plating), kuma shirya don bayarwa bayan sanyaya a dakin da zafin jiki.

3.       Wuraren Kulawa :

• Kula da hankali akai-akai tare da mai gano abu mai aiki na saman, da ƙari bisa ga dabara (ga kowane 100L, adadin kari = (10% - auna maida hankali) × 100L).

• Sauya maganin aiki a lokacin da ya gurɓata sosai. Idan ya zama danko a lokacin ajiya a dakin da zafin jiki, ana iya narke shi a cikin ruwan wanka na 40-50 ℃ kafin amfani.