Heavy-Duty Water-Based Degreaser 6690 for Mining Equipment

Key Operational Benefits of Degreaser 6690

1. Uninterrupted Wash Bay Uptime

High tolerance to extreme mineral hardness prevents calcium/magnesium scale precipitation, keeping 8–12 bar spray nozzles and pump lines completely free from clogging.

2. Pump & Equipment Protection

Engineered low-foaming profile (foam height ≤ 4 mm) eliminates air locks and pump cavitation in recirculating parts washers.

3. Simplified Waste Treatment

Solvent-free chemistry allows rapid oil-water separation after cleaning, enabling straightforward surface skimming and compliant effluent discharge.

4. Supply Chain & Transit Efficiency

Non-hazardous classification (flash point > 90°C) with full TR EAEU 041/2017 compliance guarantees fast overland customs clearance without special hazardous freight surcharges.

Custom Formulation & R&D Support: Every mining site presents unique metallurgy and water chemistry. While standard Model 6690 is optimized for heavy iron and steel components, our R&D team can customize active chelating levels, corrosion inhibitors for soft metals (Aluminum/Zinc), or low-temperature viscosity for arctic site operations. [ Request a Custom Formulation Consult ]

Technical Specifications & TDS Data for Cleaner 6690

Application Scenarios & System Integration for 6690

1. Recommended Machinery & Equipment

• Open-pit and underground mining extraction equipment, shields, dump trucks, and excavators.

• Heavy-duty gearboxes, mineral gear oil circulation lines, and hydraulic pump housings.

• Steel/iron mechanical overhaul parts washing lines.

2. Substrate Compatibility Guidelines

• Approved Substrates: Highly compatible with Carbon Steel, Cast Iron, and Heavy Ferrous Alloys.

• Safety Precautions: Not recommended for long-term soaking of active light metals (Aluminum or Zinc alloys). Avoid prolonged raw concentrate immersion on thin-walled painted components.

Dilution Ration Guidelines & Maintenance FAQs for 6690

Process & Dilution Ratios

• Thick Solidified Grease / Carbonized Mud: Dilute 1:9 to 1:10 with water (Optimal temp: 50–60°C; soak 15–30 min or recirculating spray 15 min).

• Routine Light Oil Cleaning: Dilute 1:19 to 1:33 with water.

• Cold Weather Wash Bays (5–25°C): Use 10% solution, extend contact time to 30–50 mins under 8–12 bar spray pressure.

Frequently Asked Questions (FAQs)

Q1: Can we request a 1 L sample kit for site trials on our mining equipment?

A1: Yes! We provide free 1 L testing samples for industrial mine contractors. Click "Inquire Now" to submit your application.

Q2: Does Model 6690 require hazardous chemical transport clearance?

A1: No. With a flash point > 90°C and no volatile solvents, it ships as ordinary non-hazardous chemical cargo. Fully certified under TR EAEU 041/2017 for seamless customs clearance.